Skip to main content

DataEngine 5.15.0

Major VersionM

by Support

Introduction

  • History Machine Adjustments are only available at the Machine level.
  • GPS Offset Adjustments are available for all activity types.
  • GPS Offset Adjustments carry forward to the end of the year or up to the next user entered GPS Offset adjustment.
    • Per 'Activity' type.
    • Per PUC.
  • To place your agronomic data at the right location, the following offsets are available:
    • PUC Centerline Offset: If the PUC Antenna is not located directly in the center of the machine, provide the distance (ft.) and direction from the machine centerline.
    • Implement Offset: Enter the distance and direction your agronomic activity (e.g., toolbar or spray boom, etc) is from the PUC Antenna.
  1. Selecting Machines from the Farmobile DataEngine menu will open the Machines page with all of your PUC™ listed and displayed on the map. Selecting Machines from the Farmobile DataEngine menu will open the Machines page with all of your PUC™ listed and displayed on the map.
    • Selecting Machines from the Farmobile DataEngine menu will open the Machines page with all of your PUC™ listed and displayed on the map.

  2. Select a machine to open the machine details page. Select a machine to open the machine details page.
    • Select a machine to open the machine details page.

  3. Select the History tab to open the history page for the selected machine. The History page will open with the last active day selected.
    • Select the History tab to open the history page for the selected machine.

    • The History page will open with the last active day selected.

  4. Select the calendar picker to view a different day. Days containing Machine History are highlighted black. Select edit to expand the adjustment options within the required session.
    • Select the calendar picker to view a different day. Days containing Machine History are highlighted black.

    • Select edit to expand the adjustment options within the required session.

    • The available options to adjust vary based on the current activity type.

  5. Provide your offset values so we can place your agronomic data in the correct location. Centerline Offset: Provide the distance (ft.) and direction from the center of the machine the PUC antenna is located. Implement Offset: Provide the distance and direction your agronomic activity (e.g., toolbar or spray boom, etc) is from the PUC Antenna.
    • Provide your offset values so we can place your agronomic data in the correct location.

    • Centerline Offset: Provide the distance (ft.) and direction from the center of the machine the PUC antenna is located.

    • Implement Offset: Provide the distance and direction your agronomic activity (e.g., toolbar or spray boom, etc) is from the PUC Antenna.

    • TIP: To correctly offset your PUC Antenna, select the orange question mark to view a diagram.

    • Select 'Save' to make the adjustment.

Support

Member since: 12/16/2016

75 Guides authored

0 Comments

Add Comment