DataEngine 5.6.1

Major VersionM

by Support

Introduction

  • Live Machine Adjustments are only available at the Machine level.
  • Activity Adjustments carry forward to the end of the day.
  • Swath Width, Crop Type, PUC Centerline Offset, Implement Offset, and Variety (Planting Only) will carry forward to the end of the year, or up to the next user entered adjustment based on Activity Type.
  • The type of adjustments you can make vary based on Activity.
    • Operating:
      • Activity Type: From Operating to Planting, Tillage, Harvesting, Foraging, Spraying, Spreading, or Bailing.
      • Swath Width
      • PUC Centerline Offset
      • Implement Offset
    • Planting:
      • Activity Type: From Planting to Spraying, Spreading, or Operating.
      • Swath Width
      • PUC Centerline Offset
      • Implement Offset
      • Crop Type
      • Left Half
      • Right Half
    • Harvest:
      • Activity Type: From Harvest to Operating.
      • Swath Width
        • Machine Detected: Checking this box will default the applied swath width to the machine detected value for each second if available.
      • PUC Centerline Offset
      • Implement Offset
      • Crop Type
        • Machine Detected: Checking this box will default the applied crop type to the machine detected value for each second if available.
    • Spreading:
      • Activity Type: From Spreading to Spraying, Planting, or Operating.
      • Swath Width
      • PUC Centerline Offset
      • Implement Offset
    • Spraying:
      • Activity Type: From Spraying to Spreading, Planting, or Operating.
      • Swath Width
      • PUC Centerline Offset
      • Implement Offset
  1. Selecting Machines from the Farmobile DataEngine menu will open the Machines page with all of your PUC™ listed and displayed on the map.
    • Selecting Machines from the Farmobile DataEngine menu will open the Machines page with all of your PUC™ listed and displayed on the map.

    Add Comment

  2. Select a machine to open the Machine details page.
    • Select a machine to open the Machine details page.

    Add Comment

    • Select edit to expand the adjustment options.

    • The available options to adjust vary based on the current activity type.

    Add Comment

    • The adjustment options will vary based on activity type.

    • If planting, the left and right half adjustments will not display unless a crop type is defined. If needed, you CAN type a seed variety name in the left or right half fields to create a new input.

    • Adjust your PUC Centerline Offset if your PUC GPS Antenna is not mounted directly in the center of the cab.

    • Adjust your Implement Offset to calibrate the exact distance from the PUC GPS Antenna to the Agronomic Implement.

    • Selecting now, will apply the live adjustment from now to the end of the day or next adjustment. Activity prior to now will not be adjusted.

    • Selecting startup, will apply the live adjustment to the last known startup session, and then to the end of day or the next adjustment.

    • Select save once you are ready to save your adjustments!

    Add Comment

Support

Member since: 12/16/2016

52 Guides authored

0 Comments

Add Comment