Skip to main content

Legal Update

Minor Versionm

by Support

Introduction

  • Live Machine Adjustments are only available at the Machine level.
  • GPS Offset Adjustments are available for all activity types.
  • GPS Offset Adjustments carry forward to the end of the year or up to the next user-entered GPS Offset adjustment.
    • Per 'Activity' type.
    • Per Farmobile PUC™ device.
  • To place your agronomic data at the right location, the following offsets are available:
    • Centerline Offset: If the antenna is not located directly in the center of the machine, provide the distance (ft.) and direction from the machine centerline.
    • Implement Offset: Enter the distance and direction your agronomic activity (e.g., toolbar or spray boom, etc) is from the antenna.
  1. Selecting Machines from the Farmobile DataEngine platform menu will open the Machines page with all of your Farmobile PUC device listed and displayed on the map. Selecting Machines from the Farmobile DataEngine platform menu will open the Machines page with all of your Farmobile PUC device listed and displayed on the map.
    • Selecting Machines from the Farmobile DataEngine platform menu will open the Machines page with all of your Farmobile PUC device listed and displayed on the map.

  2. Select a machine to open the Machine details page. Select a machine to open the Machine details page.
    • Select a machine to open the Machine details page.

  3. Select edit to expand the adjustment options. The available options to adjust vary based on the current activity type.
    • Select edit to expand the adjustment options.

    • The available options to adjust vary based on the current activity type.

  4. Provide your offset values so we can place your agronomic data in the correct location. Centerline Offset:  Provide the distance (ft.) and direction from the center of the machine the antenna is located. Implement Offset: Provide the distance and direction your agronomic activity (e.g., toolbar or spray boom, etc) is from the antenna.
    • Provide your offset values so we can place your agronomic data in the correct location.

    • Centerline Offset: Provide the distance (ft.) and direction from the center of the machine the antenna is located.

    • Implement Offset: Provide the distance and direction your agronomic activity (e.g., toolbar or spray boom, etc) is from the antenna.

    • TIP: To correctly offset your antenna, select the orange question mark to view a diagram.

    • Select 'Now' or 'Startup' to apply the adjustment at the correct time.

    • Select 'Save' to make the adjustment.

Support

Member since: 12/16/2016

81 Guides authored

0 Comments

Add Comment