Skip to main content

Data + Power Cord Install

by Support

Introduction

Connect PUC to data and power source.

  1. Beneath the ride-along seat tub
    • Beneath the ride-along seat tub

    • Next to the fuse panel

    • Under the cup holder

    • On the front of the right-hand control panel

    • In plain view of mounted in the cab's paneling

    • Next to the base of the drivers seat

    • Near the floor on the right side of the cab

  2. Press cable firmly into Diagnostic Port to make secure connection
    • Press cable firmly into Diagnostic Port to make secure connection

  3. Press cable into receiver Screw cable onto receiver to firmly attach to PUC
    • Press cable into receiver

    • Screw cable onto receiver to firmly attach to PUC

Finish Line

Support

Member since: 12/16/2016

81 Guides authored

0 Comments

Add Comment