Skip to main content

Antenna Install

by Support

  1. Uncoil Antenna Attach Velcro coin on back of Antenna
    • Uncoil Antenna

    • Attach Velcro coin on back of Antenna

  2. Center and secure the antenna to the cab roof orange side facing up with a clear view of the sky.
    • Center and secure the antenna to the cab roof orange side facing up with a clear view of the sky.

    • Keep the Farmobile antenna away from other antennas such as existing GPS antennas & CB radio antennas.

    • A minimum distance of 2 feet is recommended

    • Maximize the distance between the Farmobile antenna and other GPS antennas

  3. Use Wet Nap to clean attachment point of debris
    • Use Wet Nap to clean attachment point of debris

  4. Place opposing side of velcro on clean spot of cab
    • Place opposing side of velcro on clean spot of cab

    • Attach Antenna to receiving piece of velcro

    • Press down firmly on antenna to ensure connection

  5. Slide cable ties into mounts Attach antenna cable to mounts with ties Attach mounts to cab
    • Slide cable ties into mounts

    • Attach antenna cable to mounts with ties

    • Attach mounts to cab

    • Run the cable along the side of the cab using the anchors.

    • Check for a small hole or cable entry point in the cab.

    • Insert the cable into the cab.

  6. Match connector colors and attach Match connector colors and attach
    • Match connector colors and attach

Finish Line

Support

Member since: 12/16/2016

81 Guides authored

0 Comments

Add Comment